Project Zero G Forums Forum Index
Author Message
<  Swap Electrical  ~  4g63 NT harness for 4g63 Turbo powered car
Dave99gst
PostPosted: Sat Aug 04, 2012 1:04 pm  Reply with quote
Knowlege Seeker


Joined: 10 Dec 2008
Posts: 49

Can we use a NT harness ? I hear the only diff is a knock sensor wire ?
Back to top
View user's profile Send private message
knuckshaft
PostPosted: Sat Aug 04, 2012 7:21 pm  Reply with quote
Knowlege Seeker


Joined: 03 Jan 2010
Posts: 25

N/t cars also do not have a resistor pack for the injectors, that's fine if your running high impedance injectors.
Back to top
View user's profile Send private message Send e-mail
mitsubishikid
PostPosted: Wed Aug 29, 2012 2:31 am  Reply with quote
Knowlege Seeker


Joined: 23 Feb 2012
Posts: 5

In addition to the resistor pack,knock sensor, the n/t harness also uses a different mas air flow sensor, and as a result the n/t harness have a different wire connector for the mas, also n/ts don't have a waste gate solenoid.
you could get a turbo ecu, and rewire the n/t like a turbo dsm but it is pretty hard.
not impossible at least a handfuls worth of other people have done it in this manor.
see link below.

http://www.dsmtuners.com/forums/articles-turbo-system-intercooler/48231-installing-turbo-4g63-into-nt-4g63.html

here is a decent read on the subject of converting a non turbo harness to turbo setup enjoy.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 5 Hours

View next topic
View previous topic
Page 1 of 1
Project Zero G Forums Forum Index  ~  Swap Electrical

Post new topic   Reply to topic


 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and Ad Infinitum v1.06