Project Zero G Forums Forum Index
Author Message
Search found 1773 matches
Topic: Wiring Harness Service by DJpowerhaus
DJpowerHaus

Replies: 5
Views: 4176

PostForum: Marketplace   Posted: Fri Aug 05, 2016 1:21 pm   Subject: Wiring Harness Service by DJpowerhaus
You are correct in that the DSM harness will connect the ECU to the motor, but it does not hook into the chassis so that it gets power from the correct fused sources and the signals go to the right co ...
Topic: 1975 Dodge Colt 4G63-T5 trans, 8.8 rear.
DJpowerHaus

Replies: 6
Views: 3814

PostForum: Project Cars   Posted: Thu Jan 07, 2016 1:49 pm   Subject: 1975 Dodge Colt 4G63-T5 trans, 8.8 rear.
Thanks for posting. Looks great! What engine management are you using? I can't imagine you're using a stock ECU on there.
Topic: Mighty Max g64b T56 swap & NA tuning Q's; Drop SCIENCE!
DJpowerHaus

Replies: 2
Views: 1410

PostForum: Swap Mechanical   Posted: Thu Jan 07, 2016 1:43 pm   Subject: Mighty Max g64b T56 swap & NA tuning Q's; Drop SCIENCE!
Sounds like a solid plan. Sounds like you're going with a DOHC head and wideblock 2.4, am I right? There should be pretty good info here if you need it.

Any chance you'll be in the market for a w ...
Topic: Wiring Harness Service by DJpowerhaus
DJpowerHaus

Replies: 5
Views: 4176

PostForum: Marketplace   Posted: Thu Jan 07, 2016 12:11 pm   Subject: Wiring Harness Service by DJpowerhaus
I've been renovating my house since 2012 which is about the last time I did a harness. I'm pretty much done inside and can finally use my benches for wiring harnesses again. I've started building a t ...
Topic: rack & p, any progress?
DJpowerHaus

Replies: 4
Views: 984

PostForum: General   Posted: Sat Nov 14, 2015 10:10 am   Subject: rack & p, any progress?
Oh no. That old page has seen better days. I'll see what I can dig up next week.

Seems as though everyone is cutting up the 240SX crossmember and welding the brackets onto the SQ crossmember. I ...
Topic: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
DJpowerHaus

Replies: 124
Views: 84791

PostForum: Project Cars   Posted: Fri Nov 13, 2015 1:40 pm   Subject: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
Finally the slow process of putting it back together starts.

The tail lights I've had since my very first SQ back in 2002. They've managed to stay pretty nice even having been lightly into a tir ...
Topic: Quezzy Whines Customers Beware
DJpowerHaus

Replies: 3
Views: 1542

PostForum: General   Posted: Thu Nov 05, 2015 3:01 pm   Subject: Quezzy Whines Customers Beware
Paypal: mike@projectzerog.com

It costs $110 / year for hosting so every little bit helps!
Topic: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
DJpowerHaus

Replies: 124
Views: 84791

PostForum: Project Cars   Posted: Thu Nov 05, 2015 2:55 pm   Subject: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
http://projectzerog.com/images/members/djpowerhaus/zero/mitsubishi-zero-05.jpg
The Zero is starting to come together. This swap started in August 2011. First start was in winter 2015. Finally gett ...
Topic: FS: Autronic SMC w/ Autotune - 4G64 tune
DJpowerHaus

Replies: 0
Views: 815

PostForum: Marketplace   Posted: Thu Nov 05, 2015 2:01 pm   Subject: FS: Autronic SMC w/ Autotune - 4G64 tune
I am selling my Autronic SMC v1.92 (Autotune) on ebay.

http://www.ebay.com/itm/Autronic-SMC-v1-92-Autotune-ECU-/191731704489

If someone on here buys it for the asking price I will throw in a cus ...
Topic: 94 Miata NA8 (1.8L) - Part Out
DJpowerHaus

Replies: 0
Views: 829

PostForum: Marketplace   Posted: Mon Oct 26, 2015 11:24 am   Subject: 94 Miata NA8 (1.8L) - Part Out
I bought this car 10 years ago when I realized that doing 4G63 swaps on Starions meant I needed a 2nd car. This car was completely unmodified so I could reliably get to work. It has been too. I put ...
Topic: Swap 4g63 into 87 b2200
DJpowerHaus

Replies: 4
Views: 1387

PostForum: Swap Mechanical   Posted: Wed Sep 16, 2015 11:01 am   Subject: Swap 4g63 into 87 b2200
Narrow and wideblook 4G6x mounts are the same, but 2.6L G54B mounts are different. I doubt there is an OEM bracket that would let you bolt it in. Moving it forward seals the deal I think. You'll ne ...
Topic: Swap 4g63 into 87 b2200
DJpowerHaus

Replies: 4
Views: 1387

PostForum: Swap Mechanical   Posted: Mon Sep 14, 2015 2:59 pm   Subject: Swap 4g63 into 87 b2200
Is the B2200 the same chassis as the B2600... the one that had the 2.6L Mitsubishi enigne?
Topic: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
DJpowerHaus

Replies: 124
Views: 84791

PostForum: Project Cars   Posted: Sat Sep 12, 2015 12:00 pm   Subject: DJ's Starion with 4G64 and RX7 trans *updates on page 3*
Junked the police car chassis, white chassis and stars and bar chassis back in the summer of 2011. Bought a rust free 87 a few days later and then started swapping all of the racecar parts over to it ...
Topic: 87 Starion Swap Time
DJpowerHaus

Replies: 24
Views: 10597

PostForum: Project Cars   Posted: Thu May 14, 2015 2:17 pm   Subject: 87 Starion Swap Time
You still buying parts or is this thing done / driving?
Topic: GP: 2.0L Starion Oil Filter Housings
DJpowerHaus

Replies: 37
Views: 13986

PostForum: Marketplace   Posted: Mon Apr 27, 2015 11:42 pm   Subject: GP: 2.0L Starion Oil Filter Housings
I dug one out for busdriver the other day. I feel like there is one more there somewhere.
Topic: Swap thoughts for my 2G
DJpowerHaus

Replies: 2
Views: 1208

PostForum: Swap Mechanical   Posted: Thu Apr 23, 2015 8:59 am   Subject: Swap thoughts for my 2G
Just remember that the 6 bolt motor was designed 40 years ago and even the DOHC version is nearing 30 with the last ones produced over 20 years ago.

Are you sure you want to put all this work into ...
Topic: new here and need help
DJpowerHaus

Replies: 2
Views: 1181

PostForum: Swap Mechanical   Posted: Tue Apr 14, 2015 1:01 pm   Subject: new here and need help
Do you plan on going forged then? Have you checked out the Wiseco catelog?
Topic: Site
DJpowerHaus

Replies: 2
Views: 1666

PostForum: General   Posted: Mon Apr 06, 2015 3:24 pm   Subject: Site
When do you start?
Topic: Rear Sump Oil Pan
DJpowerHaus

Replies: 2
Views: 1775

PostForum: Marketplace   Posted: Mon Apr 06, 2015 3:22 pm   Subject: Rear Sump Oil Pan
Besides custom built, I doubt there are many state side, but possibly some on 7 bolt Great Wall pickup trucks from what I heard. Good luck.
Topic: GP: 2.0L Starion Oil Filter Housings
DJpowerHaus

Replies: 37
Views: 13986

PostForum: Marketplace   Posted: Mon Apr 06, 2015 3:12 pm   Subject: GP: 2.0L Starion Oil Filter Housings
I got your message and will gather up what ones I have left next time I'm at the shop. How does $80 sound? Inflation!
Topic: evo 3 head onto starion block
DJpowerHaus

Replies: 3
Views: 1817

PostForum: Swap Mechanical   Posted: Sun Jan 04, 2015 9:52 pm   Subject: evo 3 head onto starion block
Which Starion block are you referring to? G54B (2.6L) or G64B (2.0L)?
Topic: where to go
DJpowerHaus

Replies: 1
Views: 1128

PostForum: General   Posted: Sun Jan 04, 2015 9:51 pm   Subject: where to go
Compatibility between a motor and chassis would probably go in General and the details of the motor / transmission can go into mechanical. Hope that helps.
Topic: 4g63 DOHC RWD in China
DJpowerHaus

Replies: 9
Views: 4075

PostForum: Swap Mechanical   Posted: Thu Aug 21, 2014 3:21 pm   Subject: 4g63 DOHC RWD in China
Toyota is probably not using prison labor Wink
Topic: Drivers side mount
DJpowerHaus

Replies: 2
Views: 1413

PostForum: Swap Mechanical   Posted: Thu Aug 21, 2014 3:07 pm   Subject: Drivers side mount
What's a funk lock?

I feel like one the G54B brackts will work IF you drill a hole.
Topic: Front Mounted CAS
DJpowerHaus

Replies: 1
Views: 1848

PostForum: Swap Electrical   Posted: Thu Aug 21, 2014 2:19 pm   Subject: Front Mounted CAS
With a little measuring from my drawing in Sketchup and then rounding* I come up with this as my 2 triggers:

60, 30, 60, 30, 60, 30, 60, 30
30, 150, 70, 110

*I can't imagine the engineers who d ...
Topic: Front Mounted CAS
DJpowerHaus

Replies: 1
Views: 1848

PostForum: Swap Electrical   Posted: Thu Aug 21, 2014 10:31 am   Subject: Front Mounted CAS
I figured I'd finally give moving the sensor to the front a shot. I was inspired by someone else who had done it, but with a 4 tooth trigger and no home to worry about syncing. I'm setting up for my ...
Topic: 4g63 DOHC RWD in China
DJpowerHaus

Replies: 9
Views: 4075

PostForum: Swap Mechanical   Posted: Wed Aug 06, 2014 4:10 pm   Subject: 4g63 DOHC RWD in China
China makes half the stuff we use, including the good stuff. That said, I bet a Toyota transmission would outlast a Great Wall transmission. My hope is that they copied a decent Toyota transmission ...
Topic: 4g63 DOHC RWD in China
DJpowerHaus

Replies: 9
Views: 4075

PostForum: Swap Mechanical   Posted: Tue Aug 05, 2014 8:20 am   Subject: 4g63 DOHC RWD in China
Watch one of us order one only to find they copied a Billhousing. China.
Topic: 4g63 DOHC RWD in China
DJpowerHaus

Replies: 9
Views: 4075

PostForum: Swap Mechanical   Posted: Mon Aug 04, 2014 2:33 pm   Subject: 4g63 DOHC RWD in China
Can't read most stuff I'm finding. I imagine the 4G64 and 4G69 stuff is different. One transmission looks to have a detachable bellhousing, the other seems integrated.

http://mialan.ru/rus/public ...
Topic: 1987 BMW 325e
DJpowerHaus

Replies: 43
Views: 17121

PostForum: Project Cars   Posted: Mon Aug 04, 2014 2:06 pm   Subject: 1987 BMW 325e
Looks great. I'm sort of wondering why your engine mounts were located so far back when the OEM RWD mounting bolt holes look like they almost line up to the BMW's engine mounts.
Topic: 4g63 DOHC RWD in China
DJpowerHaus

Replies: 9
Views: 4075

PostForum: Swap Mechanical   Posted: Mon Aug 04, 2014 1:24 pm   Subject: 4g63 DOHC RWD in China
Neat. I never heard about this.

Looks like the H3 has a 4G64 and has a RWD option. The H5 (X240) has a 4G63 or 4G69.

I'd like to learn more. What kinds of transmissions do these use? What DOH ...
Topic: Starion flywheel rx7 turbo II clutch question
DJpowerHaus

Replies: 3
Views: 2209

PostForum: Swap Mechanical   Posted: Wed Jul 02, 2014 9:15 am   Subject: Starion flywheel rx7 turbo II clutch question
Did you ever get this sorted out? I have personally used an RX7 cluctch kit on my Starion flywheel + B2600 Bellhousing + RX7 Turbo II transmission (S5).
Topic: Cam Sensor Question?
DJpowerHaus

Replies: 3
Views: 2509

PostForum: Swap Electrical   Posted: Tue Jul 01, 2014 3:09 pm   Subject: Cam Sensor Question?
The hall effect sensors in the blacktop are pretty much the same sensors you'll find on a 95/96, just cast into plastic that can fit in a cam sensor mounted to the back of the head. The "crank&q ...
Topic: 4g63t rwd flywheel
DJpowerHaus

Replies: 9
Views: 4881

PostForum: Swap Mechanical   Posted: Tue Jul 01, 2014 1:53 pm   Subject: 4g63t rwd flywheel
Try it out, post what you find.
Topic: 4G63 FC RX7
DJpowerHaus

Replies: 5
Views: 3632

PostForum: Project Cars   Posted: Tue Jul 01, 2014 12:36 pm   Subject: 4G63 FC RX7
Also, the B2600 Bellhousing on the RX7 transmission in the RX7 will tilt the block to the exhaust side by several degrees. Not a bad thing really, puts the turbo lower making the downpipe routing eas ...
Topic: megasquirt wiring
DJpowerHaus

Replies: 9
Views: 5370

PostForum: Swap Electrical   Posted: Tue Jul 01, 2014 12:18 pm   Subject: megasquirt wiring
How did it get to be 2014? I was rolling pretty good at first. Bought a house July 2012 and work came to a dead stop. Finally, just this past week, I got around to finishing the DIYPNP and installe ...
Topic: ProjectZeroG Turns 10!
DJpowerHaus

Replies: 0
Views: 1589

PostForum: General   Posted: Mon Oct 21, 2013 10:18 am   Subject: ProjectZeroG Turns 10!
Its hard to believe it but I started this website when I began my first swap TEN years ago. At the time the 6 bolt 4G63 was already out of production for a decade. Now its been out of production for ...
Topic: wide block T 56 bellhousing
DJpowerHaus

Replies: 14
Views: 5925

PostForum: Swap Mechanical   Posted: Thu Oct 17, 2013 2:12 pm   Subject: wide block T 56 bellhousing
Yowza. Just in time for Halloween. Look at these guts!

https://www.facebook.com/PFITZNERPERFORMANCEGEARBOXES
(Video is on FB.. sorry. Will have to go there to see it)

The New T56-TR6060 &quo ...
Topic: Question about viability of a G54B
DJpowerHaus

Replies: 2
Views: 1824

PostForum: Swap Mechanical   Posted: Fri May 31, 2013 8:08 am   Subject: Question about viability of a G54B
The 2.6 head will crack if you look at it funny. There are some decent aftermarket castings (AMC) that are not quite as bad. While I came here to defend the 2.6, I think that by the time you get a s ...
Topic: wide block T 56 bellhousing
DJpowerHaus

Replies: 14
Views: 5925

PostForum: Swap Mechanical   Posted: Fri May 17, 2013 10:04 am   Subject: wide block T 56 bellhousing
What would we do without you Bill. Great stuff!
Topic: water outlet
DJpowerHaus

Replies: 3
Views: 2106

PostForum: Swap Mechanical   Posted: Mon Apr 08, 2013 10:32 am   Subject: water outlet
I had enough movement that I made extra parts to hold the o-ringed water neck into the head. On my 2nd one I just welded the neck onto head.
Topic: SCAMMED BY SUPER STREET MAG
DJpowerHaus

Replies: 2
Views: 2514

PostForum: General   Posted: Mon Apr 08, 2013 10:14 am   Subject: SCAMMED BY SUPER STREET MAG
Sounds like its a hard time to be Greek. Best of luck getting your magazines. Relax a bit. Its just a magazine!

Where in Greece are you? I remember that during my two weeks on Corfu I saw more ...
Topic: part # for 86 starion?
DJpowerHaus

Replies: 1
Views: 1918

PostForum: General   Posted: Mon Apr 08, 2013 10:10 am   Subject: part # for 86 starion?
I doubt you'll get any satisfaction out of having the part numbers as the dealer will be quick to tell you they don't have any to sell.

These are easy to come by used though. Look for a "head ...
Topic: AFTERMARKET FMIC STARION
DJpowerHaus

Replies: 5
Views: 2711

PostForum: Swap Mechanical   Posted: Mon Apr 08, 2013 7:46 am   Subject: AFTERMARKET FMIC STARION
I was able to use a 24x12x3" core IC for both mine and Craig's swaps. You can pretty easily do IC pipes without cutting up the car other than removing the battery and a few brackets. Could poss ...
Topic: FS: Two 4g64 wideblocks and two 1G DOHC heads
DJpowerHaus

Replies: 13
Views: 5132

PostForum: Marketplace   Posted: Thu Dec 20, 2012 3:53 pm   Subject: FS: Two 4g64 wideblocks and two 1G DOHC heads
Still in Austin but I have no idea how to ship an engine block!

Build a wooden crate. Easier than it sounds because you can build it out of crap and whatever works.
Topic: what a run
DJpowerHaus

Replies: 9
Views: 4184

PostForum: General   Posted: Thu Dec 20, 2012 3:49 pm   Subject: what a run
Sorry I caught this so late. Sorry for you loss Bill. I know its been quite a struggle these past few months.
Topic: Break booster dealeat
DJpowerHaus

Replies: 11
Views: 5407

PostForum: Swap Mechanical   Posted: Thu Dec 20, 2012 3:47 pm   Subject: Re: Break booster dealeat
I am in the prasess of doing a 4g63 swap in my quest and my intake manifold is not clearing the booster has any one dune a brake booster dealeat before and if so can you point me in the right diracsoi ...
Topic: head swap
DJpowerHaus

Replies: 2
Views: 1834

PostForum: Swap Mechanical   Posted: Mon Nov 05, 2012 9:11 am   Subject: head swap
6mm is a tiny bit of height difference when it comes down to it.

Which intake manifold are you using? Post a photo.
Topic: 2.1L "destroker" motor (2.4L Block, 2.0L crank)?
DJpowerHaus

Replies: 11
Views: 6367

PostForum: General   Posted: Wed Jul 04, 2012 9:41 am   Subject: 2.1L "destroker" motor (2.4L Block, 2.0L crank)?
That should work. 88mm (2.0 or 2.1) or 100mm (2.4)
Topic: Wanted: Info on 4g63 starion gigs
DJpowerHaus

Replies: 3
Views: 2172

PostForum: Project Cars   Posted: Sat Jun 30, 2012 1:29 pm   Subject: Wanted: Info on 4g63 starion gigs
Do it! Don't get too carried away. Keep it nice and simple.
All times are GMT - 5 Hours

Page 1 of 36
Goto page 1, 2, 3 ... 34, 35, 36  Next
Project Zero G Forums Forum Index

Jump to:  



Powered by phpBB and Ad Infinitum v1.06